Innovative RO monoblocks of 6000 LPH allow to set inexpensive and multipurpose water purification units into high-capacity multiarray with up to 8 monoblocks united under one master control board.
Technical specification of Monoblocks 12000-50000
| MODEL | STANDARD APRO |
|---|---|
| Operational pressure, bar | 7-10 |
| Membrane Quantity | 6 |
| Membrane Size, inch | 8 × 40 |
| Max inlet TDS, ppm | 2000 |
| Frame material | SS |
| Reduction of salt content, %* | Up to 98 |
| System recovery, %** | Up to 95 |
| Power supply | three-phase 400V, 50Hz |
| Dimensions, mm | 2700 x 840 x 1160 |
| Net weight, kg | 389 |
| Sizing (inlet, outlet, concentrate) | 2”/ 1”/ 1” |
APRO HP (High Pressure)
| MODEL | APRO HP |
|---|---|
| Operational pressure, bar | 12-16 |
| Membrane Quantity | 6 |
| Membrane Size, inch | 8 × 40 |
| Max inlet TDS, ppm | 4000 |
| Reduction of salt content, %* | Up to 98 |
| System recovery, %** | Up to 95 |
| Power supply | three-phase 400V, 50Hz |
APRO HS (High Salinity)
| MODEL | APRO HS |
|---|---|
| Operational pressure, bar | 16-30 |
| Membrane Quantity | 6 |
| Membrane Size, inch | 8 × 40 |
| Max inlet TDS, ppm | 8000 |
| Reduction of salt content, %* | Up to 98 |
| System recovery, %** | Up to 95 |
| Power supply | three-phase 400V, 50Hz |
APRO 6000 Double Pass is also available. Contact us for more information.
* Maximum salt rejection according to membrane manufacturer.
** Depends on feed water quality.