Aquaphor S800 P1 model removes high concentrations of hardness salts, iron and manganese, and as well — hydrogen sulfide in municipal or well water.
Requires up to 30% less salt
The specially designed tank contains extra fine mesh and tightly compacted chlorine-resistant ion-exchange resin with granules 2 times smaller than in classical columns. The tank design extends its` contact with water and boosts overall salt-efficiency.
All-in-1: water softening, iron, manganese & hydrogen sulfide removal
With the same volume of ion-exchange resin, AQUAPHOR S800 provides a larger surface area in contact with water, absence of channel effect, while small granules regenerate faster and more efficiently. As a result — removal of a high concentration of Fe (up to 15 ppm).
KDF85 process media accounts for for hydrogen sulfide filtration.
Up to 5 times less water for regeneration
Regeneration of softener and especially iron removal system is very a water-consuming process for classical systems with columns. The innovative, patented Dual Core Valves of the AQUAPHOR S800 assures long-term trouble-free performance concurrently wasting minimal amount of water.
7-year warranty
Efficient and durable thick wall softener tank is made of homogeneous glass-filled composite and will serve longer than is guaranteed to serve, e.g. longer than a decade. While classic columns typically serve less than 5 years. Classical blow-moulded polypropylene columns externally reinforced with the glass fiber usually serve less than 5 years.
MODEL
S800 P1
* Reducing the concentration of iron to 0.3 mg/l and below, manganese - to 0.1 mg/l and below.
** The flow rate must be checked at the end of the drain line.
***For the correct selection of the filter, use the operating capacity and pressure drop. Long-term operation at flows higher than those tested (more than 30 l/min) may lead to a decrease in cleaning efficiency.