AQUAPHOR softeners are an advanced alternative to the classic whole-home water softeners. AQUAPHOR softeners are exceptionally efficient, with low salt consumption and small amount of water needed for regeneration.

Aquaphor S1000 suits for


• Simultaneous removal of iron, manganese and hardness
• Effi cient operation even at very low tap pressure
• Optional KDF pre-filtration disc for hydrogen sulfate removal

Aquaphor S1000 Technical specification

Maximum Capacity, gram2 061
Maximum Compensated Hardness, mg/l 1 540
Maximum Ferrous Iron Reduction, ppm*10
Minimum pH, standard units7
Water & Ambient Temperature Minimum-Maximum, °C 4°-49°
Water Pressure Minimum - Maximum, bar 1,4 - 7
Maximum Flow Rate to Drain During Regeneration, l/min**7,6
Service Flow Rate (@1.0 bar) drop, l/min***20,8
Pressure Drop (@22.7 L/min), bar1
Capacity in HE mode, kg salt/gram hardness1.1 / 680
HE salt saving mode, min/l24 / 67
Capacity in HC mode, kg salt/gram hardness3.8 / 1 846
High capacity HC mode, min/l33 / 97.3
Maximum capacity in AU mode, kg/g> 6.8 / 2 061
AU maximum capacity mode, min/l50 / 122
Controller TypeMetered
Regeneration Methodintelligent, by water meter
Electrical Rating12VAC, 50/60 Hz, 0.015 kW-hr
Plumbing Connections (NPT)1 inch male (MNPT)
Minimum Drain Line ID, cm1.6
Media Tank Size - (ID x Height), cm26.7 x 66
Height, cm79.5
Footprint, cm40.4 x 48.5
Shipping Weight - approx., kg48
Fine Mesh Resin, l28
Brine & Rinse total, l/min2.8
Brine Draw, l/min0.9
Rinse, l/min1.9

Use clean white pellet, cube-style, or solar salt.

* Iron reduction to 0.3 ppm or less.
** Flow rate of flow must be verified at the end of the drain line.
***Prolonged operation of a water soſtener at flow rates exceeding 20.8 l/min may compromise performance. Intermittent flow rate must not exceed 35.2 l/min.
We use cookies to give you the best experience on our website. By continuing you agree to receive all cookies on all AQUAPHOR websites.