Affordable and practical water purifier for municipal entities or local businesses. Fully automatic all-in-one solution that replaces salt-emitting water softeners and cuts maintenance costs.

Can be used with any water
Purifies practically any tap or artesian well water up to 30 meq/L hardness and/or 10 mg/L iron.

Smart permeate recovery up to 95%
Patented, computer-controlled high-frequency drainage system. High-speed water recirculation. Drastic reduction of the wastewater volumes.

Drastic energy use reduction up to 50%
Extremely low energy consumption due to the combination of a small high-efficiency booster pump (up to 16 bar) and a recirculation pump.

Reduced consumption of antiscalants
The system works either without any antiscalant or with the reduced consumption of antiscalants.

Optional rainwater purification

Optional permeate water RO mineralization stage

APRO-1000 / 1000 SST / 1000 WH suits for

Extra benefits

More reasons why this high technology solution gets along with your requirements

Permeate recovery up to 99%
Extended membrane life
Easy maintenance
Space saving design
Low cost operation

Technical specification of APRO-1000 and APRO-1000-SST

MODELAPRO-1000APRO-1000-SST
Operational pressure, bar7 -107 -10
Permeate Flow, LPH10001000
Membrane Quantity44
Membrane Size, inch4 × 404 × 40
Max inlet TDS, ppm20002000
Frame materialCoated CSTLSS
Reduction of salt content, %*Up to 95Up to 95
System recovery, %**75 - 9975 - 99
Power supplysingle-phase 230V, 50Hzsingle-phase 230V, 50Hz
Dimensions, mm830 x 520 x 1300830 x 520 x 1300
Net weight, kg9497
Sizing (inlet, outlet, concentrate)3⁄4”/1 ⁄2 ”/1 ⁄2 ” NPTF3⁄4”/1 ⁄2 ”/1 ⁄2 ” NPTF

APRO-1000-WH

MODELAPRO-1000-WH
Permeate Flow, LPH
1000
Membrane Quantity
4
Production of clean water LPH
1 000
Reduction of salt content, %
Up to 96%
System recovery, %
Up to 95%
Membrane type
4 x 4040
Power supply
230V, 50Hz
Dimensions, mm (L×W×H )
600 × 800 × 1 650
Accumulation tank
Build in, 80 liters
Net weight, kg
175
Sizing (inlet, outlet, concentrate)
1”/1 ⁄2 ”/1 ⁄2 ” NPTF (PB)

APRO1000 HP (High Pressure)

MODELAPRO 1000 HP
Operational pressure, bar
12 -16
Membrane Quantity
4
Membrane Size, inch
4 × 40
Max inlet TDS, ppm
4000
Reduction of salt content, %*
Up to 98
System recovery, %**
75 - 95
Power supply
three-phase 400V, 50Hz

APRO1000 HS (High Salinity)

MODELAPRO 1000 HS
Operational pressure, bar
16 -30
Membrane Quantity
4
Membrane Size, inch
4 × 40
Max inlet TDS, ppm
8000
Reduction of salt content, %*
Up to 98
System recovery, %**
75 - 95
Power supply
three-phase 400V, 50Hz


* Maximum salt rejection according to membrane manufacturer.
** Depends on feed water quality.
We use cookies to give you the best experience on our website. By continuing you agree to receive all cookies on all AQUAPHOR websites.