Name: Aquaphor S1000
Brand: Aquaphor
Rating: 4.74 (26 reviews)

AQUAPHOR softeners are an advanced alternative to the classic whole-home water softeners.The solution is exceptionally efficient, with low salt consumption and small amount of water needed for regeneration.

AQUAPHOR S1000 contains 28 L of chlorine resistant ion exchange resin.
It is a popular solution for hard water treatment — both in cottages and in city apartments. The system takes up no more space than a washing machine, so there's no need for a separate utility space.

Salt savings up to 60%
Thanks to the unique tank design and extra-fine ion-exchange resin, salt efficiency is maximized.

2-in-1: water softening & iron removal
Removal of high concentration of Fe (up to 15 mg/L concentration in water) and hardness salts.

Exceptionally small water usage for regeneration
The innovative, patented Dual Core Valves of the AQUAPHOR softener assure long-term trouble-free performance whilst wasting minimal amount of water.

10-year warranty for the main parts
The high-strength thick wall made of homogeneous glass-filled composite will serve over 10 years, while classic columns typically serve less than 5 years.

Low maintenance
In addition to low salt consumption of the system, ion-exchange resin lasts 10 times longer that in typical water softeners.

Operates efficiently even at very low tap pressure

Fully recyclable body and tank

NSF certified

Aquaphor S1000 suits for

Advantages

• Simultaneous removal of iron, manganese and hardness
• Efficient operation even at very low tap pressure
• Optional KDF pre-filtration disc for hydrogen sulfide removal

Aquaphor S1000 Technical specification

MODEL	S1000
Maximum Capacity, gram	2 061
Maximum Compensated Hardness, mg/l	1 540
Maximum Ferrous Iron Reduction, ppm*	10
Minimum pH, standard units	7
Water & Ambient Temperature Minimum-Maximum, °C	4°-49°
Water Pressure Minimum - Maximum, bar	1,4 - 7
Maximum Flow Rate to Drain During Regeneration, l/min**	7,6
Service Flow Rate (@1.0 bar) drop, l/min***	20,8
Pressure Drop (@22.7 L/min), bar	1
Capacity in HE mode, kg salt/gram hardness	1.1 / 680
HE salt saving mode, min/l	24 / 67
Capacity in HC mode, kg salt/gram hardness	3.8 / 1 846
High capacity HC mode, min/l	33 / 97.3
Maximum capacity in AU mode, kg/g	> 6.8 / 2 061
AU maximum capacity mode, min/l	50 / 122
Controller Type	Metered
Regeneration Method	intelligent, by water meter
Electrical Rating	12VAC, 50/60 Hz, 0.015 kW-hr
Plumbing Connections (NPT)	1 inch male (MNPT)
Minimum Drain Line ID, cm	1.6
Media Tank Size - (ID x Height), cm	26.7 x 66
Height, cm	79.5
Footprint, cm	40.4 x 48.5
Shipping Weight - approx., kg	48
Fine Mesh Resin, l	28
Brine & Rinse total, l/min	2.8
Brine Draw, l/min	0.9
Rinse, l/min	1.9

Use clean white pellet, cube-style, or solar salt.
* Iron reduction to 0.3 ppm or less.
** Flow rate of flow must be verified at the end of the drain line.
***Prolonged operation of a water soſtener at flow rates exceeding 20.8 l/min may compromise performance. Intermittent flow rate must not exceed 35.2 l/min.