Exceptionally salt- and water-efficient whole-home cabinet water softener. Up to 30% reduction of salt emissions of a household.

Aquaphor S1000 P1 model removes high concentrations of hardness salts, iron and manganese, and as well — hydrogen sulfide in municipal or well water.

Requires up to 30% less salt
The specially designed tank contains extra fine mesh and tightly compacted chlorine-resistant ion-exchange resin with granules 2 times smaller than in classical columns. The tank design extends its` contact with water and boosts overall salt-efficiency.

All-in-1: water softening, iron, manganese & hydrogen sulfide removal
With the same volume of ion-exchange resin, AQUAPHOR S1000 provides a larger surface area in contact with water, absence of channel effect, while small granules regenerate faster and more efficiently. As a result — removal of a high concentration of Fe (up to 15 ppm).

KDF85 process media accounts for for hydrogen sulfide filtration.

Up to 5 times less water for regeneration
Regeneration of softener and especially iron removal system is very a water-consuming process for classical systems with columns. The innovative, patented Dual Core Valves of the AQUAPHOR S1000 P1 assures long-term trouble-free performance concurrently wasting minimal amount of water.

Aquaphor S1000 Technical specification

Maximum Capacity, gram2 061
Maximum Compensated Hardness, mg/l 1 712
Maximum Ferrous Iron Reduction, ppm*14
Minimum pH 6
Temperature of water and environment, °C +5...+38
Water pressure, MPa 0.14–0.7
Minimum water flow for backwash, l/min**7,6
Maximum flow to drain during regeneration, l/min9,1
Nominal / maximum flow, l / min25 / 38
Pressure loss at flow 22.7 l/min (6 gpm), MPa***0.1
Capacity in HE mode, kg of salt / gram of hardness1.1 / 670
Capacity in HC mode, kg of salt / gram of hardness3.0 / 1 406
Maximum capacity in AU mode, kg of salt / gram of hardness5.4 / 1680
Regeneration methodIntelligent, by water meter
Power options12 VAC; 50/60 Hz; 0.015 kWh
Connection ports (NPT)1" (MNPT)
Minimum drain line diameter, mm (in)16 (5/8)
Filtration tank size (ID × H), mm267 × 584
Height, cm79.5
Base, cm40.4 × 48.5
Gross weight, kg48
Superfine monodisperse ion exchange resin, l28
Quartzite, kg0.8
KDF85, l0.35

* Reducing the concentration of iron to 0.3 mg/l and below, manganese - to 0.1 mg/l and below
*** The flow rate must be checked at the end of the drain line.
***For the correct selection of the filter, use the operating capacity and pressure drop. Long-term operation at flows higher than

those tested (more than 30 l/min) may lead to a decrease in cleaning efficiency.

Compensated hardness calculator
We use cookies to give you the best experience on our website. By continuing you agree to receive all cookies on all AQUAPHOR websites.