AQUAPHOR softeners are an advanced alternative to the classic whole-home water softeners. The solution is exceptionally efficient, with low salt consumption and small amount of water needed for regeneration.
AQUAPHOR S550 contains 15 L of chlorine resistant ion exchange resin. It is a popular solution for hard water treatment — both in cottages and in city apartments. It is an ultra compact system, so there's no need for a separate utility space. Moreover, it perfectly fits under the kitchen sink.
Salt savings up to 60%
Thanks to the unique tank design and extra-fine ion-exchange resin, salt efficiency is maximized.
2-in-1: water softening & iron removal
Removal of high concentration of Fe (up to 15 mg/L concentration in water) and hardness salts.
Exceptionally small water usage for regeneration
The innovative, patented Dual Core Valves of the AQUAPHOR softener assure long-term trouble-free performance whilst wasting minimal amount of water.
Low maintenance
In addition to low salt consumption of the system, ion-exchange resin lasts 10 times longer that in typical water softeners.
Operates efficiently even at very low tap pressure
Fully recyclable body and tank
NSF certified
AQUAPHOR S550 contains 15 L of chlorine resistant ion exchange resin. It is a popular solution for hard water treatment — both in cottages and in city apartments. It is an ultra compact system, so there's no need for a separate utility space. Moreover, it perfectly fits under the kitchen sink.
Salt savings up to 60%
Thanks to the unique tank design and extra-fine ion-exchange resin, salt efficiency is maximized.
2-in-1: water softening & iron removal
Removal of high concentration of Fe (up to 15 mg/L concentration in water) and hardness salts.
Exceptionally small water usage for regeneration
The innovative, patented Dual Core Valves of the AQUAPHOR softener assure long-term trouble-free performance whilst wasting minimal amount of water.
Low maintenance
In addition to low salt consumption of the system, ion-exchange resin lasts 10 times longer that in typical water softeners.
Operates efficiently even at very low tap pressure
Fully recyclable body and tank
NSF certified
Aquaphor S550 suits for
Whole-house water supply
Laundry & Cleaning
Beauty & SPA
Advantages
• Simultaneous removal of iron, manganese and hardness
• Efficient operation even at very low tap pressure
• Optional KDF pre-filtration disc for hydrogen sulfide removal
Aquaphor S550 Technical specification
MODEL | S550 |
---|---|
Maximum Capacity, gram | 1 044 |
Maximum Compensated Hardness, mg/L | 840 |
Maximum Ferrous Iron Reduction, ppm* | 10 |
Minimum pH, standard units | 7 |
Water & Ambient Temperature Minimum-Maximum, °C | 4°-49° |
Water Pressure Minimum - Maximum, bar | 1,4 - 7 |
Maximum Flow Rate to Drain During Regeneration, L/min** | 7,6 |
Service Flow Rate (@1.0 bar) drop, L/min*** | 20,8 |
Pressure Drop (@22.7 L/min), bar | 1 |
Capacity in HE mode, kg salt/gram hardness | 0.6 / 392 |
HE salt saving mode, min/l | 17 / 49 |
Capacity in HC mode, kg salt/gram hardness | 1.8 / 821 |
High capacity HC mode, min/l | 23 / 63 |
Maximum capacity in AU mode, kg/g | 3.3 / 1 044 |
AU maximum capacity mode, min/l | 30 / 75 |
Controller Type | Metered |
Regeneration Method | intelligent, by water meter |
Electrical Rating | 12VAC, 50/60 Hz, 0.015 kW-hr |
Plumbing Connections (NPT) | 1 inch male (MNPT) |
Minimum Drain Line ID, cm) | 1.6 |
Media Tank Size - (ID x Height), cm | 26.7 x 27.7 |
Height, cm | 55.4 |
Footprint, cm | 32.2 x 43.2 |
Shipping Weight - approx., kg | 35 |
Fine Mesh Resin, l | 15 |
Drain Line (Minimum I.D.) | 5/8 inch (1.6 cm) |
Brine & Rinse total, l/min | 2.8 |
Brine Draw, l/min | 0.9 |
Rinse, l/min | 1.9 |
Use clean white pellet, cube-style, or solar salt.
* Iron reduction to 0.3 ppm or less.
** Flow rate of flow must be verified at the end of the drain line.
***Prolonged operation of a water soſtener at flow rates exceeding 20.8 l/min may compromise performance. Intermittent flow rate must not exceed 35.2 l/min.
Video