Affordable and practical water purifier for municipal entities or local businesses. Fully automatic all-in-one solution that replaces salt-emitting water softeners and cuts maintenance costs.

Can be used with any water
Purifies practically any tap or artesian well water up to 30 meq/L hardness and/or 10 mg/L iron.

Smart permeate recovery up to 95%
Patented, computer-controlled high-frequency drainage system. High-speed water recirculation. Drastic reduction of the wastewater volumes.

Drastic energy use reduction up to 50%
Extremely low energy consumption due to the combination of a small high-efficiency booster pump (up to 16 bar) and a recirculation pump.

Reduced consumption of antiscalants
The system works either without any antiscalant or with the reduced consumption of antiscalants.

Optional rainwater purification

APRO-1000 / 1000 SST suits for

Extra benefits

More reasons why this high technology solution gets along with your requirements

Permeate recovery up to 99%
Extended membrane life
Easy maintenance
Space saving design
Low cost operation

Technical specification of APRO-1000 and APRO-1000-SST

MODELAPRO-1000APRO-1000-SST
Operational pressure, bar7 -107 -10
Permeate Flow, LPH10001000
Membrane Quantity44
Membrane Size, inch4 × 404 × 40
Max inlet TDS, ppm20002000
Frame materialCoated CSTLSS
Reduction of salt content, %*Up to 95Up to 95
System recovery, %**75 - 9975 - 99
Power supplysingle-phase 230V, 50Hzsingle-phase 230V, 50Hz
Dimensions, mm820 x 500 x 1280820 x 500 x 1280
Net weight, kg9394
Sizing (inlet, outlet, concentrate)3⁄4”/1 ⁄2 ”/1 ⁄2 ” NPTF3⁄4”/1 ⁄2 ”/1 ⁄2 ” NPTF

APRO 1000 HP (High Pressure)

MODELAPRO 1000 HP
Operational pressure, bar12 -16
Membrane Quantity4
Membrane Size, inch4 × 40
Max inlet TDS, ppm4000
Reduction of salt content, %*Up to 98
System recovery, %**75 - 95
Power supplythree-phase 400V, 50Hz

APRO 1000 HS (High Salinity)

MODELAPRO 1000 HS
Operational pressure, bar16 -30
Membrane Quantity4
Membrane Size, inch4 × 40
Max inlet TDS, ppm8000
Reduction of salt content, %*Up to 98
System recovery, %**75 - 95
Power supplythree-phase 400V, 50Hz


* Maximum salt rejection according to membrane manufacturer.
** Depends on feed water quality.
We use cookies to give you the best experience on our website. By continuing you agree to receive all cookies on all AQUAPHOR websites.