Exceptionally salt- and water-efficient whole-home cabinet water softener. Up to 30% reduction of salt emissions of a household.

Aquaphor S800 P1 model removes high concentrations of hardness salts, iron and manganese, and as well — hydrogen sulfide in municipal or well water.

Requires up to 30% less salt
The specially designed tank contains extra fine mesh and tightly compacted chlorine-resistant ion-exchange resin with granules 2 times smaller than in classical columns. The tank design extends its` contact with water and boosts overall salt-efficiency.

All-in-1: water softening, iron, manganese & hydrogen sulfide removal
With the same volume of ion-exchange resin, AQUAPHOR S800 provides a larger surface area in contact with water, absence of channel effect, while small granules regenerate faster and more efficiently. As a result — removal of a high concentration of Fe (up to 15 ppm).

KDF85 process media accounts for for hydrogen sulfide filtration.

Up to 5 times less water for regeneration
Regeneration of softener and especially iron removal system is very a water-consuming process for classical systems with columns. The innovative, patented Dual Core Valves of the AQUAPHOR S800 assures long-term trouble-free performance concurrently wasting minimal amount of water.

7-year warranty
Efficient and durable thick wall softener tank is made of homogeneous glass-filled composite and will serve longer than is guaranteed to serve, e.g. longer than a decade. While classic columns typically serve less than 5 years. Classical blow-moulded polypropylene columns externally reinforced with the glass fiber usually serve less than 5 years.

Aquaphor S800 P1 suits for

Maximum capacity, g1 680
Maximum compensated hardness, mg/l1 380
Maximum concentration of dissolved iron and manganese, mg/l*12
Minimum pH6
Temperature of water and environment, °C+5...+38
Water pressure, MPa0,14–0,7
Minimum water flow for backwash, l/min**7,6
Maximum flow to drain during regeneration, l/min9,1
Nominal / maximum flow, l / min25 / 38
Pressure loss at flow 22.7 l/min (6 gpm), MPa***0,1
Capacity in HE mode, kg of salt / gram of hardness1,1 / 670
Capacity in HC mode, kg of salt / gram of hardness3,0 / 1406
Maximum capacity in AU mode, kg of salt / gram of hardness5,4 / 1625
Regeneration methodIntelligent, by water meter
Power options12 VAC; 50/60 Hz; 0.015 kWh
Connection ports (NPT)1" (MNPT)
Minimum drain line diameter, mm (in)16 (5/8)
Filtration tank size (ID × H), mm267 × 584
Height, cm70,6
Base, cm40,4 × 48,5
Gross weight, kg43
Superfine monodisperse ion exchange resin, l23
Quartzite, kg0,8
or KDF85, l0,35

* Reducing the concentration of iron to 0.3 mg/l and below, manganese - to 0.1 mg/l and below.
** The flow rate must be checked at the end of the drain line.
***For the correct selection of the filter, use the operating capacity and pressure drop. Long-term operation at flows higher than those tested (more than 30 l/min) may lead to a decrease in cleaning efficiency.
Compensated hardness calculator
We use cookies to give you the best experience on our website. By continuing you agree to receive all cookies on all AQUAPHOR websites.