Exceptionally salt- and water-efficient whole-home cabinet water softener. Up to 30% reduction of salt emissions of a household.
Aquaphor S1000 P1 model removes high concentrations of hardness salts, iron and manganese, and as well — hydrogen sulfide in municipal or well water.
Requires up to 30% less salt
The specially designed tank contains extra fine mesh and tightly compacted chlorine-resistant ion-exchange resin with granules 2 times smaller than in classical columns. The tank design extends its` contact with water and boosts overall salt-efficiency.
All-in-1: water softening, iron, manganese & hydrogen sulfide removal
With the same volume of ion-exchange resin, AQUAPHOR S1000 provides a larger surface area in contact with water, absence of channel effect, while small granules regenerate faster and more efficiently. As a result — removal of a high concentration of Fe (up to 15 ppm).
KDF85 process media accounts for for hydrogen sulfide filtration.
Up to 5 times less water for regeneration
Regeneration of softener and especially iron removal system is very a water-consuming process for classical systems with columns. The innovative, patented Dual Core Valves of the AQUAPHOR S1000 P1 assures long-term trouble-free performance concurrently wasting minimal amount of water.
Aquaphor S1000 P1 model removes high concentrations of hardness salts, iron and manganese, and as well — hydrogen sulfide in municipal or well water.
Requires up to 30% less salt
The specially designed tank contains extra fine mesh and tightly compacted chlorine-resistant ion-exchange resin with granules 2 times smaller than in classical columns. The tank design extends its` contact with water and boosts overall salt-efficiency.
All-in-1: water softening, iron, manganese & hydrogen sulfide removal
With the same volume of ion-exchange resin, AQUAPHOR S1000 provides a larger surface area in contact with water, absence of channel effect, while small granules regenerate faster and more efficiently. As a result — removal of a high concentration of Fe (up to 15 ppm).
KDF85 process media accounts for for hydrogen sulfide filtration.
Up to 5 times less water for regeneration
Regeneration of softener and especially iron removal system is very a water-consuming process for classical systems with columns. The innovative, patented Dual Core Valves of the AQUAPHOR S1000 P1 assures long-term trouble-free performance concurrently wasting minimal amount of water.
Aquaphor S1000 Technical specification
| MODEL | S1000 |
|---|---|
| Maximum Capacity, gram | 2 061 |
| Maximum Compensated Hardness, mg/l | 1 712 |
| Maximum Ferrous Iron Reduction, ppm* | 14 |
| Minimum pH | 6 |
| Temperature of water and environment, °C | +5...+38 |
| Water pressure, MPa | 0.14–0.7 |
| Minimum water flow for backwash, l/min** | 7,6 |
| Maximum flow to drain during regeneration, l/min | 9,1 |
| Nominal / maximum flow, l / min | 25 / 38 |
| Pressure loss at flow 22.7 l/min (6 gpm), MPa*** | 0.1 |
| Capacity in HE mode, kg of salt / gram of hardness | 1.1 / 670 |
| Capacity in HC mode, kg of salt / gram of hardness | 3.0 / 1 406 |
| Maximum capacity in AU mode, kg of salt / gram of hardness | 5.4 / 1680 |
| Regeneration method | Intelligent, by water meter |
| Power options | 12 VAC; 50/60 Hz; 0.015 kWh |
| Connection ports (NPT) | 1" (MNPT) |
| Minimum drain line diameter, mm (in) | 16 (5/8) |
| Filtration tank size (ID × H), mm | 267 × 584 |
| Height, cm | 79.5 |
| Base, cm | 40.4 × 48.5 |
| Gross weight, kg | 48 |
| Superfine monodisperse ion exchange resin, l | 28 |
| Quartzite, kg | 0.8 |
| KDF85, l | 0.35 |
* Reducing the concentration of iron to 0.3 mg/l and below, manganese - to 0.1 mg/l and below
*** The flow rate must be checked at the end of the drain line.
***For the correct selection of the filter, use the operating capacity and pressure drop. Long-term operation at flows higher than
those tested (more than 30 l/min) may lead to a decrease in cleaning efficiency.