Exceptionally salt- and water-efficient whole-home water softener. It is also an eco-friendly solution: damaging salt emissions are reduced by up to 30%.
Requires up to 30% less salt
Maximum efficiency with minimum salt consumption thanks to the unique tank design and extra-fine ion-exchange resin. The latter lasts 10 times longer than that in typical water softeners.
All-in-one solution
The filter media in this model contains KDF 85 for H2S content reduction. The expanded functions of the system include water softening, removal of hydrogen sulfide, iron and manganese.
Patented control valve
The patented valve construction ensures trouble-free operation of the system throughout its entire service life.
7-year warranty
Fully recyclable body and tank serve longer than a decade., while classic columns typically last at least twice as less.
Requires up to 30% less salt
Maximum efficiency with minimum salt consumption thanks to the unique tank design and extra-fine ion-exchange resin. The latter lasts 10 times longer than that in typical water softeners.
All-in-one solution
The filter media in this model contains KDF 85 for H2S content reduction. The expanded functions of the system include water softening, removal of hydrogen sulfide, iron and manganese.
Patented control valve
The patented valve construction ensures trouble-free operation of the system throughout its entire service life.
7-year warranty
Fully recyclable body and tank serve longer than a decade., while classic columns typically last at least twice as less.
Aquaphor S550 P1 suits for
Whole-house water supply
Laundry & Cleaning
Beauty & SPA
| MODEL | S550 P1 |
|---|---|
| Maximum Capacity, gram | 1 100 |
| Maximum Compensated Hardness, mg/L | 1200 |
| Maximum concentration of dissolved iron and manganese, mg/l* | 10 |
| Minimum pH | 6 |
| Temperature of water and environment, °C | 5°+38° |
| Water pressure, MPa | 0.14 — 0.7 |
| Minimum water flow for backwash, l/min | 7.6 |
| Maximum flow to drain during regeneration, l/min | 9.1 |
| Nominal / maximum flow, l / min | 23 / 35 |
| Pressure loss at flow 22.7 l/min (6 gpm), MPa*** | 0.1 |
| Capacity in HE mode, kg of salt / gram of hardness | 0.8 / 465 |
| Capacity in HC mode, kg of salt / gram of hardness | 2.1 / 903 |
| Maximum capacity in AU mode, kg of salt / gram of hardness | 3.3 / 1100 |
| Regeneration method | Intelligent, by water meter |
| Power options | 12 VAC; 50/60 Hz; 0.015 kWh |
| Connection ports (NPT) | 1" (MNPT) |
| Minimum drain line diameter, mm (in) | 16 (5/8) |
| Filtration tank size (ID × H), mm | 267 × 277 |
| Height, cm | 55.4 |
| Base, cm | 32.2 × 43.2 |
| Gross weight, kg | 35 |
| Superfine monodisperse ion exchange resin, l | 15 |
| Quartzite, kg | 0.8 |
| KDF85, l | 0.35 |
* Reducing the concentration of iron to 0.3 mg/l and below, manganese - to 0.1 mg/l and below.
**The flow rate must be checked at the end of the drain line.
***For the correct selection of the filter, use the operating capacity and pressure drop. Long-term operation at flows higher than those tested (more than 30 l/min) may lead to a decrease in cleaning efficiency.
Video